Deck and Pitches
Tegola tiles can be applied to any nailable deck with standard ‘clout’ roofing nails. Exterior grade plywood of a minimum thickness of 12mm is usually preferred. They can also be
applied to non-nailable decks by using a torch-on method of installation.
The minimum pitch without underlay varies from 14 to 20º depending on the tile used, as shown in the data table overleaf. For pitches less than these minimums, or for slope
lengths over 7mm, or exposed locations, the torch-on method or the Tegola self adhesive underlay must be used.
For technical advice on Tegola or Prestige please contact Roger Smith at Matthew Hebden Tel: +44 (0) 114 236 8122 or email: sales@matthewhebden.co.uk |
|  |